Try These before Air Conditioning Repair in Brisbane
With the warm winds in swing there comes a time when many think, do my air conditioner really demand an aircon service in Brisbane? So, instead of sweating let's look into some basic steps that help you understand the condition of your AC.
Top 5 Things to Try Before AC Repair in Brisbane:
Thermostat Settings
The settings must be “cool”. The temperature of the thermostat should be lower in comparison to the room temperature. Now, check fan must be set to “on” or “auto”. The settings “on” indicates to the fan to keep on running, no matter whether the AC is cooling or not. The settings should be “auto” as the fan will run only if AC is cooling.
If the thermostat shows blank then it may require new batteries. Or, maybe it has tripped the associated circuit breaker.
Home’s Circuit Breaker Panel
Whenever an AC is on it usually draws a huge amount of power via electrical circuits. If in case a power surge takes place, then the chances are the circuit breaker will tend to trip leading to a stoppage on electricity from flowing via the circuit. If that happens, then the AC is unable to turn on.
If once the circuit breaker trips, then it automatically turns “off” from “on”. So, reset the tripped breakers by just changing it to “on” position.
Power Switches & the HVAC System
In every central AC, there are two power switches. One indicates towards the indoor unit and the other one to the outdoor unit. It is required that both of the switches must be in the “on” position to make your AC work.
The indoor unit switch must be located near the air handler. The switch for the outdoor unit is associated with the outdoor unit only that too in a metal box located outside of the home.
Cleanliness of an Air Filter
If an air filter is dirty then it can actually stop the flow of air. It will make your AC look overheating and then shutting off. Sometimes, you may start thinking it’s the time to avail Air Conditioning Maintenance in Brisbane services.
If you notice an air filter is dirty then it may be required to get replaced. So, you can always make the necessary filters handy to change whenever require.
Debris and Plant around Outdoor Unit
Loose leaves, dirt, landscaping and any dirt can actually stop the airflow coming through the outdoor unit. This will make your AC tend to overheat and turn off.
You need to remove the debris to not block the airflow. The AC units that are outside start to release heat from the top area, which further helps in easy flow of air.
Try Resetting the Air Conditioner Unit
Once the power surge starts to trip the circuit breakers then there are chances the AC will start to act very strangely. The major thing is that your AC needs just a hard reset which can be done on your own without AC Repair in Brisbane. So, follow the manual instructions and implement the required steps.
What If AC didn’t work?
Comments
Post a Comment